STOCK PRODUCTS

Protect tile edges with a smooth transition between tile coverings and carpet at lower elevations. Stocked in AE Satin Anodized Aluminum in sizes 80(5/16"), 100(3/8"), and 125(1/2"). Other finishes and sizes can be ordered. Call for more details.

Conceal access panels in tiled walls without impairing the visual appearance of the tile covering.

Squared Tile Edging Stocked in multiple sizes and finishes. Call for availability and pricing.

Stocked in multiple sizes and finishes. Call for availability and pricing.

Flat Tile Edging Stocked in multiple sizes and finishes. Call for availability and pricing.

Stocked in sizes 24", 28", 32", 36", 40", 44", and 48" grates.

Available in 38", 48", and 60" long which are all 4 1/2" wide and 6" tall.

Available in 3/4" and 1/2" prefabricated waterproofing seals with over-molded rubber gaskets designed for protrusions through KERDI, DITRA, or DITRA-XL membranes and protect moisture-sensitive backing panels at the mixing valve.

Stocked in sizes 24", 28", 32", 36", 40", 44", and 48" grates.

Available in 2 and 10 packs of preformed, seamless corners made for waterproofing inside and outside corners of KERDI, KERDI-BOARD, and DITRA assemblies to prevent leaks and mold-growth.

4 1/2" prefabricated waterproofing seals with over-molded rubber gaskets designed for protrusions through KERDI, DITRA, or DITRA-XL membranes and protect moisture-sensitive backing panels at the mixing valve.

Stocked in 24" to 48". Call for availability and pricing.

Prefabricated expanded polystyrene sloped trays with integrated KERDI waterproofing specifically designed to accept the KERDI-LINE linear drain. The trays are stocked in 39" x 39", 48" x 48", 55" x 55", 36" x 72" (drain on 36" side), and 38" x 76" sizes. The 38" x 76" trays are available with drain insultation on either 38" or 76" side. The KERDI-SHOWER-LT/-LTS are available with center (-LT) and perimeter (-LTS) drain placements in ten configurations with reduced perimeter heights to aide in the installation of curbless showers.

Prefabricated expanded polystyrene sloped trays with integrated KERDI waterproofing specifically designed to accept the KERDI-LINE linear drain. The trays are stocked in 39" x 39", and 55" x 55" sizes. The KERDI-SHOWER-LT/-LTS are available with center (-LT) and perimeter (-LTS) drain placements in ten configurations with reduced perimeter heights to aide in the installation of curbless showers.

1/8" x 1/8"

Kerdi waterproofing fabric rolls are 3' 3" wide. They are available in 54 SF, 108 SF, and 323 SF rolls.

Available in 10.5 oz tubes in bright white

Waterproofing board available in multiple sizes and thicknesses. Call for availability and pricing. 2' x 8' x 2", 4' x 5' x 1/2", 4' x 8' x 1/2". A multifunctional tile substrate and building panel, which can also be used in bonded waterproofing assemblies with tile.

Waterproofed and ready to tile shower benches stocked- 38" wide x 11 1/2" long x 20" high 48" wide, 16" long x 20" high

Waterproofing strips used to seal butt joints and floor to wall connections. Stocked in- 5" x 33' and 5" x 98' 5", 7 1/4" x 16.5', and 7 1/4" x 98' 5"

Available in 2 and 10 packs of preformed, seamless corners made for waterproofing inside and outside corners of KERDI, KERDI-BOARD, and DITRA assemblies to prevent leaks and mold-growth.

*Stock Limited*

Stocked in 40 and 100 packs.

Hair strainer for Kerdi Drains

KDA5 FLK ABS 5 1/4" Adapter Kit is sold with waterproofing four inside corners, two outside corners, one pipe seal, one mixing valve, and one 10.5 oz. Kerdi- Fix tube.

KERDI-SHOWER-SB is waterproof and ready for tile, leaving only sealing of joints and corners to complete waterproofing. The bench is available in triangular and rectangular configurations in the following sizes (width x depth x height). The triangular benches are 16" x 16” x 20” (41 x 41 x 51 cm) and 24” x 24” x 20” (61 x 61 x 51 cm).

Stocked in sizes 24", 28", 32", 36", 40", 44", 48" and 72" grates. Call for stock location.

Sloped, prefabricated shower trays are designed to integrate with the Schluter®-KERDI-DRAIN. Kits include shower tray, two 38" curbs, one 128 SF roll of Kerdi, one 33" Kerdi Band roll, and a flange. Flange includes four inside, 2 outside corners, one pipe 3/4" seal, and 4 1/4" mixing valve seal.

Sloped, prefabricated shower trays are designed to integrate with the Schluter®-KERDI-DRAIN. Kits include shower tray, two 38" curbs, one 128 SF roll of Kerdi, one 33" Kerdi Band roll, and a flange. Flange includes four inside, 2 outside corners, one pipe 3/4" seal, and 4 1/4" mixing valve seal. *Also available in 48" x 48", 48" x 72", and 72" x 72".

Prefabricated shower niche made of KERDI-BOARD that can be installed in both KERDI and KERDI-BOARD wall assemblies. The shower niche features a 1/2" -thick by 2" wide integrated bonding flange and is available in 12" x 6", 12" x 12", and 12" x 20", and 12" x 28" sizes.

Prefabricated shower niche made of KERDI-BOARD that can be installed in both KERDI and KERDI-BOARD wall assemblies. The shower niche features a 1/2" -thick by 2" wide integrated bonding flange and is available in 12" x 6", 12" x 12", and 12" x 20", and 12" x 28" sizes.

1/4" x 1/4" square notch trowel perfect for laying Ditra Heat matting.

Stocked in rolls of 54 SF, 150 SF, and 323 SF with 1/8" thickness. DITRA serves as an uncoupling layer, waterproofing membrane, and vapor management layer that accommodates moisture from beneath the tile covering. Further, DITRA performs all these functions while still providing adequate support/load distribution for the tile covering.

Kit Includes: Small Solder Melt Splice connectors, braided cable, small lengths of wire, copper foil with adhesive backing, and heat sink sealant.

Stocked in 8.6 SF mates at 1/4" thickness. DITRA serves as an uncoupling layer, waterproofing membrane, and vapor management layer that accommodates moisture from beneath the tile covering. Further, DITRA performs all these functions while still providing adequate support/load distribution for the tile covering.

Stocked in 3' 3" x 33' = 108 SF rolls, 5/16" thick. Schluter®-DITRA-HEAT-DUO is an uncoupling and waterproofing membrane with an integrated bonding fleece that provides sound control, as well as a thermal break. Optionally, the system can be customized with floor heating cables to create a warm, luxurious tile floor.

Stocked in 3' 3" x 2' 7" = 8.6 SF sheet, 5/16" thick. Schluter®-DITRA-HEAT-DUO is an uncoupling and waterproofing membrane with an integrated bonding fleece that provides sound control, as well as a thermal break. Optionally, the system can be customized with floor heating cables to create a warm, luxurious tile floor.

Heating cables are stocked in 120 Volt or 240 Volt in numerous different lengths to fit any job type. Schluter®-DITRA-HEAT-E-HK are twisted pair heating cables designed for integration with the DITRA-HEAT uncoupling membrane in interior floor warming applications.

Stocked in 175 SF rolls, 5/16" thick. DITRA serves as an uncoupling layer, waterproofing membrane, and vapor management layer that accommodates moisture from beneath the tile covering. Further, DITRA performs all these functions while still providing adequate support/load distribution for the tile covering.

11/64" x 11/64" Square notch trowel.

Schluter ALL-SET® is a specialized, modified thin-set mortar for use as a bond coat within tile assemblies that is optimized for use with Schluter® membranes and boards. Schluter ALL-SET® is smooth and creamy, as well as easy to handle and spread. It is sag-resistant and ideal for setting tile on both horizontal and vertical surfaces. Schluter ALL-SET® is suitable for use with ceramic, porcelain, and stone tile, including large and heavy tile, in conjunction with Schluter®-Systems’ uncoupling and waterproofing membranes (e.g., DITRA, DITRA-HEAT, KERDI, etc.), the Schluter®-Shower System, and KERDI-BOARD. Schluter ALL-SET® can be used in both interior and exterior systems and systems and is available in both grey and white.

Schluter ALL-SET® is a specialized, modified thin-set mortar for use as a bond coat within tile assemblies that is optimized for use with Schluter® membranes and boards. Schluter ALL-SET® is smooth and creamy, as well as easy to handle and spread. It is sag-resistant and ideal for setting tile on both horizontal and vertical surfaces. Schluter ALL-SET® is suitable for use with ceramic, porcelain, and stone tile, including large and heavy tile, in conjunction with Schluter®-Systems’ uncoupling and waterproofing membranes (e.g., DITRA, DITRA-HEAT, KERDI, etc.), the Schluter®-Shower System, and KERDI-BOARD. Schluter ALL-SET® can be used in both interior and exterior systems and systems and is available in both grey and white.

High-Performance, easy-preparation, self-leveling underlayment. Ultraplan Easy is a quick-setting, self-leveling underlayment that requires only a clean, soundly bonded, properly prepared and primed substrate before application.

Premium, lightweight mortar with polymer for large and heavy tile. MAPEI Ultralite Mortar is a premium-grade, lightweight, single-component mortar for large-and-heavy-tile and non-sag applications, and which can also be used for thin-set mortar installations. This high-performance, polymer-modified mortar is formulated with Easy Glide Technology for ease of application, and with BioBlock technology for mold and mildew resistance. MAPEI Ultralite Mortar utilizes Ultralite Technology for twice the coverage of a standard thin-set mortar per pound/kg and contains more than 20% recycled content.

Premium, highly deformable, lightweight, gauged-tile mortar with polymer. MAPEI Ultralite S2 is a premium-grade, lightweight, single-component thin-set mortar that is ideal for installation of gauged (formerly “thin”) porcelain tile. This high-performance, highly deformable, polymer-modified mortar is formulated with Easy Glide Technology™ for ease of application. MAPEI Ultralite S2 features a long open time and superior transfer properties to enhance back-buttering, and can be used also for ceramic tile and stone. MAPEI Ultralite S2 ’s unique Ultralite Technology™ provides twice the coverage of a standard thin-set mortar per pound/kg and may contribute to LEED points with 20% recycled content.

Professional, lightweight mortar with polymer for large and heavy tile. MAPEI Ultralite Mortar Pro is a professional-grade, lightweight, single-component thin-set mortar that can also be used for large-and-heavy-tile and non-sag applications. This polymer-modified mortar is formulated with Easy Glide Technology™ for ease of application. MAPEI Ultralite Mortar Pro’s unique Ultralite Technology™ provides twice the coverage of a standard thin-set mortar per pound/kg and contains more than 20% recycled content.

Premium, Rapid-Setting Tile Mortar with Polymer Ultraflex RS is a premium-grade, single-component, high-performance, polymer-modified, rapid-setting thin-set mortar for interior and exterior installations of tile. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. Ultraflex RS is a FastTrack Ready™ product, allowing grouting in 2 to 3 hours. It can be used for both interior and exterior installations of tile in most residential floor and wall applications. In commercial applications, use on interior floor and wall installations and exterior floors. Thanks to MAPEI’s High-Hydrated Cement Technology (HCT™), Ultraflex RS offers superior drying-out characteristics for quick curing and does not contribute to efflorescence. Ultraflex RS meets or exceeds ANSI A118.4F, ANSI A118.11 and ANSI A118.15F requirements for fast-setting mortars when mixed with water.

Ultraflex LFT is a premium, nonsag, large-and-heavy-tile mortar and thin-set mortar designed for large-format and heavy tile and stone for interior/exterior floor, wall and countertop installations. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. It is formulated with Easy Glide Technology for ease of application.

Ultraflex LFT is a premium, nonsag, large-and-heavy-tile mortar and thin-set mortar designed for large-format and heavy tile and stone for interior/exterior floor, wall and countertop installations. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. It is formulated with Easy Glide Technology for ease of application.

Ultraflex LFT Rapid is a premium, rapid-setting, non-sag, large-and-heavy-tile mortar (formerly known as “medium-bed mortar”) and thin-set mortar for large and heavy tile and stone for interior/exterior floor, wall and countertop installations. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. Thanks to MAPEI’s High-Hydrated Cement Technology (HCT™), Ultraflex LFT Rapid offers superior drying-out characteristics for quick curing and does not contribute to efflorescence. Ultraflex LFT Rapid is FastTrack Ready™, allowing grouting in 3 to 4 hours.