STOCK PRODUCTS

STONETECH® Enhancer Pro™ Sealer is the color enhancing, penetrating sealer that provides maximum color & stain protection on natural stone, masonry and grout. It deepens the natural rich color of porous surfaces without altering the finish and penetrates deep to protect it from staining.

Now with Microban® antimicrobial technology! STONETECH® Heavy Duty Grout Sealer is a water-based penetrating grout sealer that offers advanced stain and antimicrobial product protection on grout surfaces. Designed to keep grout looking newer longer, it protects against oil and water-based stains and inhibits the continuous growth of bacteria, mold and mildew.

The daily, pH neutral stone & tile cleaner, formulated to remove tough everyday spills, dirt and grease on natural stone, tile, masonry, and grout. Unlike other home cleaning products, this stone & tile cleaner works without degrading the surface.

STRATA_MAT is a next generation high performance uncoupling mat for use under ceramic tile and stone installations, for both residential and commercial applications.

STRATA_HEAT™ Spliceless Wire is productivity-based, spliceless heat wire that maximizes heat transfer and simplifies the installation process. This floor warming wire system is designed for use under many types of finished floor coverings to provide luxury and comfort.

The STRATA_HEAT™ Thermostats are dual voltage 120V/240V and simple to use; the STRATA_HEAT Programmable Thermostat is a digital programmable thermostat and the STRATA_HEAT Wi-Fi Thermostat can be controlled through smart phone technology.

STRATA_HEAT Mat combines the comfort of floor heating wire with the advantages associated with STRATA _MAT™ uncoupling membrane. Warm your tile floor and enhance the mechanical bond to the substrate. STRATA_HEAT Mat will provide faster drying of the mortar, allowing for shorter time to grout. At the same time it will easily hold the STRATA_HEAT Spliceless Wire at multiple spacing scenarios for floor heating or warming installations. Just as our other uncoupling membranes it is specifically designed for use with both modified and unmodified mortars, you can use the appropriate mortar for the installation.

The ready-to-use, powerful specialty cleaner formulated to remove soap scum, hard water stains and dirt from natural stone, tile and grout.

Now built with Microban® Antimicrobial Technology! The water-based sealer that offers advanced stain and antimicrobial product protection on quartz, engineered stone and tile.

STONETECH® Restore™ Acidic Cleaner is the heavy duty, acidic cleaner that removes dirt, hard water deposits, efflorescence and rust from tile and acid resistant stone, masonry and grout. It quickly renews the surface to a like-new appearance. This no VOC, concentrated cleaner can be diluted to light, medium and heavy duty use and also cleans tough soap scum and light grout haze. Great for use in heavy traffic areas.

STONETECH® Quartz & Tile Cleaner is the ready-to-use, daily cleaner that removes dust, dirt, spills and even light stains from quartz, engineered stone and tile surfaces. This gentle, non-abrasive cleaner is a safe, low VOC solution to maintaining a clean quartz surface without the need to rinse down with water. It leaves a clean fresh scent and is great for use for use on kitchen and bathroom countertops and backsplashes.

STONETECH® Oil Stain Remover is the ready-to-use, problem solving solution to removing deep-set oil-based stains from natural stone, masonry and grout. Just stir, apply and wait to pull out tough, deep-set organic oil and grease stains and avoid costly restoration fees.

STONETECH® Mold & Mildew Stain Remover is a ready-to-use, powerful specialty cleaner specifically formulated to remove mold, mildew and even algae on natural stone, tile, masonry and grout. It quickly dissolves unsightly mold and mildew stains without degrading or harming the surface. STONETECH Mold & Mildew Stain Remover features a foaming action sprayer that allows the cleaner to adhere well to vertical applications and avoid messy drips. Great for bathroom showers and vanities, kitchen countertops, backsplashes, patios and more.

Available in gallon & quart STONETECH® KlenzAll™ Cleaner is the heavy duty strength, alkaline cleaner made to remove the toughest dirt, grease and grime from natural stone, tile, masonry and grout. It cleans, degreases and prepares the surface for resealing, is safe on stone and is low VOC. Available in ready-to-use and concentrate formulas for use on heavily used areas such as countertops, walls or floors.

STONETECH® Heavy Duty sealer is a water-based penetrating sealer that provides advanced stain and antimicrobial product protection, while preserving the natural look of the surface. It protects against oil and water-based stains on natural stone, tile, masonry, and grout in interior and exterior applications.

STONETECH® Epoxy Grout Haze & Coating Stripper is a fast-acting, water-based gel that works as an epoxy grout haze remover and can dissolve tough coatings from vertical and horizontal surfaces. Give this product 10 minutes and it will work as your all-in-one heavy duty epoxy grout haze remover and you can wipe away various coatings such as varnish, lacquer, sealer, wax, paint, polyurethane and acrylic without harsh solvents. It features a non-runny gel solution that adheres well to vertical applications and is great for walls, floors, countertops and backsplashes.

STONETECH® Grout Release is an easy-to-use, pre-grout coating that makes grout installation clean-up quick and easy. It offers maximum protection on natural stone and masonry during grout installation to avoid difficult to remove grout stains and haze and can easily dissolve with water.

STONETECH® BulletProof® Sealer is a water-based penetrating sealer that provides maximum stain and antimicrobial product protection while preserving the natural look of the surface. It can be used as a grout sealer, tile sealer, masonry sealer and in many other applications. This premium sealer offers the best protection on the most porous natural stone, tile, masonry and grout surfaces in interior and exterior applications.

SPECTRALOCK PRO Premium Grout† is a patented, high performance epoxy grout which offers excellent color uniformity, durability, stain protection, and beautiful, full grout joints in an easy-to-use, non-sag formula. Features built-in Microban® antimicrobial product protection fight the growth of mold and mildew on grout surface.

SPECTRALOCK 2000 IG is a highly chemical resistant industrial grade epoxy grout for: ceramic tile, pavers, floor brick, packing house tile, and stone. SPECTRALOCK 2000 IG is supplied as factory proportioned kits consisting of epoxy resin, hardener, and silica filler. Features built-in Microban® antimicrobial product protection fight the growth of mold and mildew on grout surface.

A high performance siliconized acrylic latex sealant designed for interior applications for ceramic tile and stone. It is ideal for a variety of caulking applications in bathrooms, kitchens and floors.

PRIME-N-BOND is a versatile, ready-to-use, single coat, low VOC primer designed to enhance the adhesion of mortars to many smooth and non-absorptive substrates that can be difficult to bond to. PRIME-N-BOND also improves bonding of LATICRETE self-leveling products. For interior use only.

NXT Primer is a concentrated premium quality, water-based primer designed to be applied prior to the installation of NXT Underlayment's. NXT Primer penetrates deeply into substrates and maximizes bond strength.

NXT Level is a cement-based underlayment for use in leveling interior substrates. NXT Level produces a flat, smooth and hard surface for the installation of finished flooring. NXT Level can be placed from 1/8–3" (3–76 mm) in a single lift.

A polymer modified large and heavy tile mortar specifically formulated to provide a one-step installation for large format ceramic tile, porcelain tile, marble and stone on floors.

LATAPOXY 300 Adhesive is a chemical resistant, epoxy adhesive that will bond to most sound, clean surfaces. Adhesive spreads easily and cleans with water while fresh. LATAPOXY 300 Adhesive is a factory-proportioned kit consisting of epoxy resin, hardener and chemical resistant silica filler. LATAPOXY 300 Adhesive can be used in interior and exterior (see limitations) walls and floors, wet and dry areas.  

LATAPOXY 310 Stone Adhesive is a two component, high strength epoxy stone adhesive, which is formulated for the spot bonding method of tile and stone installations on vertical surfaces. LATAPOXY 310 Stone Adhesive is a premium stone adhesive featuring non-sag performance at high temperatures up to 95°F (35°C).