STOCK PRODUCTS

STONETECH® BulletProof® Sealer is a water-based penetrating sealer that provides maximum stain and antimicrobial product protection while preserving the natural look of the surface. It can be used as a grout sealer, tile sealer, masonry sealer and in many other applications. This premium sealer offers the best protection on the most porous natural stone, tile, masonry and grout surfaces in interior and exterior applications.

SPECTRALOCK PRO Premium Grout† is a patented, high performance epoxy grout which offers excellent color uniformity, durability, stain protection, and beautiful, full grout joints in an easy-to-use, non-sag formula. Features built-in Microban® antimicrobial product protection fight the growth of mold and mildew on grout surface.

SPECTRALOCK 2000 IG is a highly chemical resistant industrial grade epoxy grout for: ceramic tile, pavers, floor brick, packing house tile, and stone. SPECTRALOCK 2000 IG is supplied as factory proportioned kits consisting of epoxy resin, hardener, and silica filler. Features built-in Microban® antimicrobial product protection fight the growth of mold and mildew on grout surface.

A high performance siliconized acrylic latex sealant designed for interior applications for ceramic tile and stone. It is ideal for a variety of caulking applications in bathrooms, kitchens and floors. Call for color availability.

PRIME-N-BOND is a versatile, ready-to-use, single coat, low VOC primer designed to enhance the adhesion of mortars to many smooth and non-absorptive substrates that can be difficult to bond to. PRIME-N-BOND also improves bonding of LATICRETE self-leveling products. For interior use only.

The New & Improved PERMACOLOR® Select is an advanced high-performance two-part cementitious grout system offering Water Dispersion Technology(TM) and the industry’s first dispersible dry pigment solution. It is designed for virtually all types of residential and commercial installations and offers optimum performance on the most demanding exterior or interior applications. Easy to mix, grout and clean, this grout is fast setting and is suitable for joints 1/16” to ½” (1.5mm – 12mm) wide on floors or walls.

NXT Primer is a concentrated premium quality, water-based primer designed to be applied prior to the installation of NXT Underlayment's. NXT Primer penetrates deeply into substrates and maximizes bond strength.

NXT Level is a cement-based underlayment for use in leveling interior substrates. NXT Level produces a flat, smooth and hard surface for the installation of finished flooring. NXT Level can be placed from 1/8–3" (3–76 mm) in a single lift.

A polymer modified large and heavy tile mortar specifically formulated to provide a one-step installation for large format ceramic tile, porcelain tile, marble and stone on floors.

LATAPOXY 300 Adhesive is a chemical resistant, epoxy adhesive that will bond to most sound, clean surfaces. Adhesive spreads easily and cleans with water while fresh. LATAPOXY 300 Adhesive is a factory-proportioned kit consisting of epoxy resin, hardener and chemical resistant silica filler. LATAPOXY 300 Adhesive can be used in interior and exterior (see limitations) walls and floors, wet and dry areas.  

LATAPOXY 310 Stone Adhesive is a two component, high strength epoxy stone adhesive, which is formulated for the spot bonding method of tile and stone installations on vertical surfaces. LATAPOXY 310 Stone Adhesive is a premium stone adhesive featuring non-sag performance at high temperatures up to 95°F (35°C).

HYDRO BAN® Sheet Membrane is a waterproof sheet membrane that is installed using a substrate appropriate LATICRETE® thin-set. Due to its polymeric construction, HYDRO BAN Sheet Membrane can also be used as a vapor barrier/waterproofing membrane for steam room and steam shower applications. Available in rolls, tapes, corners and collars, HYDRO BAN Sheet Membrane allows for a quick, easy waterproofing installation, which will retain its integrity for the life of the installation.

Available in 12" x 12" or Combo with 12" x 12" & 12" x 6" HYDRO BAN Preformed Niche is a component of the expanded HYDRO BAN line of waterproofing products that allow for high quality rapid shower installations. HYDRO BAN Preformed Niche is constructed of lightweight high-density expanded polystyrene with a waterproof finish and is ready to tile.

Available in 4' or 8' HYDRO BAN Preformed Curb Overlay is made from high-density expanded polystyrene with a liquid waterproof membrane coating. HYDRO BAN Preformed Curb Overlay is lightweight and ready-to-tile.

Available in 3' x 5' x 1/2", 4' x 8' x 1/2". A lightweight easy to handle and ready to tile wall board designed to be used in bonded tile or stone installations.

HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that does not require the use of fabric in the field, coves or corners. HYDRO BAN is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. It bonds directly to a wide variety of substrates. Equipped with Microban antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane.

Blue 92 Anti-Fracture Membrane is a two–part system consisting of a liquid rubber and reinforcing fabric. When cured, it forms a highly flexible membrane. While the thin bed method of tile installation provides many advantages, this method can be affected by problems with shrinkage cracking in concrete and other types of substrates. Cracks can telegraph through the tile and/or grout joints. To reduce or eliminate cracks in tile work, a flexible membrane should be applied to the cracked substrate prior to the installations of ceramic tile, marble and stone.

9235 Waterproofing Membrane is an easy to install, thin, load-bearing waterproofing membrane designed specifically for the special requirements of ceramic tile, stone and brick installations. It’s a perfect solution for wet areas and continuous water submersion applications.

3701 Mortar Admix is a specially designed latex admixture for use with thin-set mortars, cement grouts, cement mortar beds, and other cement mixes.

3701 Lite Mortar does not need a latex admixture. You will only need to add water to produce thick bed mortar or a vertical repair mortar/screed. It contains no respirable crystalline silica levels that exceed the OSHA action level*. 3701 Lite Mortar weighs half the amount of a conventional thick bed mortar and retains the same coverage.

3701 Fortified Mortar is a polymer fortified blend of carefully selected polymers, portland cement and graded aggregates. 3701 Fortified Mortar does not require the use of latex admix, you only need to add water to produce thick bed mortar with exceptional strength. 3701 Fortified Mortar is an approved substitute for 226 Thick Bed Mortar mixed with 3701 Mortar Admix.

317 Mortar is a bagged cementitious powder. It is mixed with either water or latex admixture for installing ceramic tile and stone using the thin-set method of installation. 317 Mortar must be fortified with 333 Super Flexible Additive or 3701 Mortar Admix for exterior use, porcelain, mosaic, glass and stone tiles, and heavy traffic areas.

333 Flexible Additive is an extraordinarily flexible latex additive for use with thin set mortars and other cement mixes. 333 Super Flexible Additive is specially formulated to provide a strong, super flexible bond to most surfaces, including plywood. Recommended for interior and exterior use with a LATICRETE® thin-set.

A high performance, lightweight, non-sag, polymer fortified, ultra-white glass tile adhesive mortar that is specifically formulated for use in glass tile applications.

272 Mortar is a high performance bagged cementitious powder to be mixed with either water or latex admixture to install ceramic tile and stone using the thin-set method of installation.

The ultimate one-step, polymer fortified, thin-set mortar for interior and exterior installation of ceramic tile, porcelain tile, Gauged Porcelain Tile Panels/Slabs (GPTP), stone, quarry tile, pavers and brick. 254 Platinum, designed to just mix with water, has a long open time with unsurpassed adhesion and workability. 254 PLATINUMTM is a LATICRETE approved substitute for 211 Powder mixed with 4237 Latex Additive.

209 Floor Mud is a factory prepared blend of high strength portland cement and carefully graded sand. This dry mix is used with water to make semi-dry conventional floor mortar beds. 209 Floor Mud is suitable for interior applications wherever a traditional mortar bed is required under ceramic tile, and ideal for small shower pan fills in bathrooms. Mix with 3701 Mortar Admix for added strength.

253 Gold is a superior polymer fortified bagged cementitious thin-set powder to be mixed with water to install ceramic tile and natural stone using the thin-set method of installation.

4-XLT is a multi-use, polymer fortified adhesive mortar. 4-XLT offers tremendous utility including non-sag wall installations, large heavy tile mortar build-up of up to 3/4" (19 mm) and thin-set applications.

4-XLT Rapid is a fast setting, multi-use, polymer fortified adhesive mortar for large format tile installations. Ready to grout in 3 to 4 hours. 4-XLT Rapid offers tremendous utility for non-sag wall installations, Large and Heavy Tile and thin-set applications on floors. 4-XLT Rapid is built on Water Dispersion Technology™ (WDT) platform. WDT provides for the complete dispersion of water within the mix allowing users to achieve the desired application consistency

Pre-sloped shower trays integrated with Kerdi waterproofing fabric. Center drain pans are available in 36" x 36", 36" x 48", 38" x 38", 38" x 60", 48" x 48", 48" x 60", 48" x 72", 60" x 60", and 72" x 72".

Stocked in 4" and 7" Recommended blade for cutting hard materials such as granite, rustic tiles, clinker, refractory, slate and porcelain tile. The specific design of the diamond band offers greater speed of cutting harder materials without sacrificing finish quality. Only for straight cuts, not suitable for mitering

The range of TS-MAX tile cutters offers professionals a light and functional cutting tool. RUBI TS-MAX tile cutters are ideal for the intensive cutting of ceramic tiles, especially for frequent cutting of porcelain tiles (BIA type). All models in the range of TS-MAX tile cutters include a practical, high-performance single-point breaker with 1764 pounds of maximum breaking pressure. It was specially designed for cutting tough materials with maximum thicknesses of 9/16”.

The range of TS-MAX tile cutters offers professionals a light and functional cutting tool. RUBI TS-MAX tile cutters are ideal for the intensive cutting of ceramic tiles, especially for frequent cutting of porcelain tiles (BIA type). All models in the range of TS-MAX tile cutters include a practical, high-performance single-point breaker with 1764 pounds of maximum breaking pressure. It was specially designed for cutting tough materials with maximum thicknesses of 9/16”.

The range of TS-MAX tile cutters offers professionals a light and functional cutting tool. RUBI TS-MAX tile cutters are ideal for the intensive cutting of ceramic tiles, especially for frequent cutting of porcelain tiles (BIA type). All models in the range of TS-MAX tile cutters include a practical, high-performance single-point breaker with 1764 pounds of maximum breaking pressure. It was specially designed for cutting tough materials with maximum thicknesses of 9/16”.

RUBI SPEED PLUS tile cutters are the best choice the professional can acquire for intensive cutting of BIII type tools and glazed stoneware, (BIIa type), and which at specific times need extra power for sporadic cutting of porcelain tiles (BIa type). RUBI SPEED PLUS tile cutters have a multipoint breaker, perfect for great results in diagonal or angular cuts. All models in the RUBI SPEED PLUS range of tile cutters include supplements at the base for greater stability of the ceramic tile and to facilitate cutting when it is large format.

RUBI SPEED PLUS tile cutters are the best choice the professional can acquire for intensive cutting of BIII type tools and glazed stoneware, (BIIa type), and which at specific times need extra power for sporadic cutting of porcelain tiles (BIa type). RUBI SPEED PLUS tile cutters have a multi-point breaker, perfect for great results in diagonal or angular cuts. All models in the RUBI SPEED PLUS range of tile cutters include supplements at the base for greater stability of the ceramic tile and to facilitate cutting when it is large format.

RUBI SPEED PLUS tile cutters are the best choice the professional can acquire for intensive cutting of BIII type tools and glazed stoneware, (BIIa type), and which at specific times need extra power for sporadic cutting of porcelain tiles (BIa type). RUBI SPEED PLUS tile cutters have a multi-point breaker, perfect for great results in diagonal or angular cuts. All models in the RUBI SPEED PLUS range of tile cutters include supplements at the base for greater stability of the ceramic tile and to facilitate cutting when it is large format.

EXTREME scoring wheels and rollers are made of high quality tungsten carbide, with a special titanium carbide coating. Thanks to this coating, RUBI EXTREME rollers and scoring wheels suffer less wear during use. But in addition, the EXTREME scoring wheels and rollers when mounted on a bearing, completely eliminates the friction of the wheel itself with the wheel shaft. This combination allows the behavior of the EXTREME scoring wheel to be much superior to the rest, offering a soft scratch and a life of 300%, compared to SILVER scoring wheels and rollers under the same conditions of use.

The MULTIDRILL guide allows efficient centering both in the drilling of holes in dry cut and in wet cutting. The MULTIDRILL guide is fixed using a suction cup, directly on the surface to be drilled, either horizontally or vertically. Of great precision and reliability, the MULTIDRILL guide ensures an exact perforation and avoids possible displacements of the bit. The MULTIDRILL guide is compatible with DRYGRES, EASYGRES, FORAGRES, MINIGRES up to Ø83 mm. Includes connection for hose and tank (ref 50947).

The EASYGRES drill kits are the most economical solution for those users who need to make perforations of different diameters in all types of ceramic tiles. EASYGRES are diamond electrodeposited drills, wet cut, suitable for use with electric drill without hammer. The quality of the diamond used in the design and manufacture of the EASYGRES drill bits allows the drilling of stoneware, porcelain stoneware, granite, marble and glass.

The DRYGRES kits are the most economical solution for those users who need to drill, dry, of different diameters, in any type of ceramic tile. The range of DRYGRES diamond drills are recommended for the drilling of all types of ceramic tile, especially porcelain stoneware, and other coating materials such as marble and granite.

For drilling of all types of ceramic tiles, especially porcelain tiles, and other wall materials such as marble and granite, RUBI has the EASYGRES diamond drill bit range. The EASYGRES range are electroplated diamond drill bits for wet cutting, suitable for use with a non-percussive power drill.

he RUBI DC-250 range of tile saws is formed by machines with mobile heads offering the professional tile Installer maximum functionality and reliability. The DC-250 is ideal for intensive cutting of glazed and stoneware tiles, as well as for cutting porcelain tiles or the occasional cutting of natural stone. Available in two models: 850 and 1200, with cutting lengths of 38.6 and 47.4 in. respectively (including plunge cut).

Rounded Tile Edging Stocked in multiple sizes and finishes. Call for availability and pricing.

Stocked in multiple sizes and finishes. Call for availability and pricing.

Stocked in multiple sizes and finishes. Call for availability and pricing.

Protect edges with a smooth transition between tile coverings and floor coverings at lower elevations. Stocked in AE Satin Anodized Aluminum in sizes 80(5/16"), 100(3/8"), and 125(1/2"). Other finishes and sizes can be ordered. Call for more details.

Protect tile edges with a smooth transition between tile coverings and carpet at lower elevations. Stocked in AE Satin Anodized Aluminum in sizes 80(5/16"), 100(3/8"), and 125(1/2"). Other finishes and sizes can be ordered. Call for more details.

Conceal access panels in tiled walls without impairing the visual appearance of the tile covering.

Squared Tile Edging Stocked in multiple sizes and finishes. Call for availability and pricing.

Stocked in multiple sizes and finishes. Call for availability and pricing.

Flat Tile Edging Stocked in multiple sizes and finishes. Call for availability and pricing.

Stocked in sizes 24", 28", 32", 36", 40", 44", and 48" grates.