STOCK PRODUCTS

The RUBI TRILLER is a lightweight and compact manual vibration device for large format tile. It is designed to avoid the generation of encapsulated air bubbles between the adhesive and the back of the ceramic tile. Facilitating, in this way, an ideal adhesion between adhesive and material. RUBI TRILLER is recommended, to a greater extent, in porcelain sheet installation work. Above all, in formats greater than 118 inches x 40 inches. It can also be used for the installation and correct fixing of uncoupling or waterproofing sheets.

The constant evolution of ceramic materials poses a challenge for professionals in the installation of ceramic tiles. With the arrival of porcelain stoneware, the hardness of the materials became the professional's main concern. Now, with the new productive processes, and with the consolidation of porcelain tiles as the most widely used material, as well as the growing presence of large formats or ceramic sheets, the main handicap is the difficulty in cutting ceramic tiles. This difficulty is the result of combining the hardness, thickness, surface finish and possible internal stresses of the material itself.

The SLIM CUTTER PLUS ceramic tile cutter is specially designed for cutting porcelain sheets with formats greater than 10ft x 3ft (300 cm x 100 cm) and with thicknesses of 1/8" to 3/8" on an inch (3 to 10 mm). The set consists of 3 guides of approx. 43" inches (110 cm); 1 scoring trolley handle with 7/8" of an inch(Ø22 mm) EXTREME roller (ref. 01901); 1 separating pliers; 3 fixing suction cups and a reinforced nylon carry bag. The guides are made of aluminum and are assembled to guarantee a perfect scratch, always .39" inches (1 cm) from the edge of the guide itself. The suction cups will help us fix the ceramic tile guide and prevent it from moving. The guides also have two silicone strips to help fixation. With a handle to facilitate the work, the scoring carriage mounts a 7/8" (Ø 22 mm) tungsten carbide roller with bearings, especially for those jobs with longer scratches.

Workbench for cutting and handling large format ceramic sheets using the tools in the Rubi SLAB SYSTEM product line. The extra reinforced aluminum bars give the SLAB TABLE high rigidity and great stability. Giving it a maximum load capacity of up to 550 lbs. The separation between its 5 bars made of aluminum, allows the user to drill and cut without fear of damaging the table itself.

The Rubi Slab A-Frame is a high loading capacity cart (727lbs.) with an aluminum structure that allows the professional tile installer to improve the handling and mobility of large-format ceramic tiles or slabs. Transport materials (both single pieces or in boxes) up to 10.4 ft x 5.24ft (320 cm x 160 cm) Compatible with conveyors from the Rubi Slab range: Slab Trans Heavy-Duty, Slab Trans Heavy Duty-N, Slim Easy Trans and Slim Easy Trans Plus Maximum load capacity of 727.5lbs (330 kg), or 220lbs (100 kg) using the hooks for the conveyor Aluminum structure guarantees maximum robustness with minimum weight Equipped with 4 gray non-marking rubber wheels; all wheels allow a 360° turn and have a brake The front stops of the Slab A-Frame cart have a non-slip rubber protector, and the front profiles of the trolley also incorporate rubber protection to protect the load from impacts The lower crossbar is adjustable in height and is especially suitable for transporting and loading small boxes To facilitate the transport of the product, outside its work area, as well as its installation, the easel has a quick folding and unfolding system with keyless fixing knobs The cart also incorporates rubber bumpers on the sides to be able to support it in a vertical position when it is folded. This reduces the space needed for transport and storage to a minimum. Weighs 96 lbs.

For transporting ceramic sheets and large-format tiles with a maximum recommended size of 60x60" (150 x 150 cm). Suction cups with a safety indicator. Each suction cup, of 20 cm in diameter and with a high-load capacity, has an indicator that warns us in the event of a loss of suction. The suction cups have a protector to prevent damage during transport. With a maximum load capacity of 40 kg at their maximum length.

Stocked in 100 and 500 count bags

Stocked in 100 and 500 count bags

Stocked in 4" and 7" Recommended blade for cutting hard materials such as granite, rustic tiles, clinker, refractory, slate and porcelain tile. The specific design of the diamond band offers greater speed of cutting harder materials without sacrificing finish quality. Only for straight cuts, not suitable for mitering

The range of TS-MAX tile cutters offers professionals a light and functional cutting tool. RUBI TS-MAX tile cutters are ideal for the intensive cutting of ceramic tiles, especially for frequent cutting of porcelain tiles (BIA type). All models in the range of TS-MAX tile cutters include a practical, high-performance single-point breaker with 1764 pounds of maximum breaking pressure. It was specially designed for cutting tough materials with maximum thicknesses of 9/16”.

The range of TS-MAX tile cutters offers professionals a light and functional cutting tool. RUBI TS-MAX tile cutters are ideal for the intensive cutting of ceramic tiles, especially for frequent cutting of porcelain tiles (BIA type). All models in the range of TS-MAX tile cutters include a practical, high-performance single-point breaker with 1764 pounds of maximum breaking pressure. It was specially designed for cutting tough materials with maximum thicknesses of 9/16”.

The range of TS-MAX tile cutters offers professionals a light and functional cutting tool. RUBI TS-MAX tile cutters are ideal for the intensive cutting of ceramic tiles, especially for frequent cutting of porcelain tiles (BIA type). All models in the range of TS-MAX tile cutters include a practical, high-performance single-point breaker with 1764 pounds of maximum breaking pressure. It was specially designed for cutting tough materials with maximum thicknesses of 9/16”.

RUBI SPEED PLUS tile cutters are the best choice the professional can acquire for intensive cutting of BIII type tools and glazed stoneware, (BIIa type), and which at specific times need extra power for sporadic cutting of porcelain tiles (BIa type). RUBI SPEED PLUS tile cutters have a multipoint breaker, perfect for great results in diagonal or angular cuts. All models in the RUBI SPEED PLUS range of tile cutters include supplements at the base for greater stability of the ceramic tile and to facilitate cutting when it is large format.

RUBI SPEED PLUS tile cutters are the best choice the professional can acquire for intensive cutting of BIII type tools and glazed stoneware, (BIIa type), and which at specific times need extra power for sporadic cutting of porcelain tiles (BIa type). RUBI SPEED PLUS tile cutters have a multi-point breaker, perfect for great results in diagonal or angular cuts. All models in the RUBI SPEED PLUS range of tile cutters include supplements at the base for greater stability of the ceramic tile and to facilitate cutting when it is large format.

RUBI SPEED PLUS tile cutters are the best choice the professional can acquire for intensive cutting of BIII type tools and glazed stoneware, (BIIa type), and which at specific times need extra power for sporadic cutting of porcelain tiles (BIa type). RUBI SPEED PLUS tile cutters have a multi-point breaker, perfect for great results in diagonal or angular cuts. All models in the RUBI SPEED PLUS range of tile cutters include supplements at the base for greater stability of the ceramic tile and to facilitate cutting when it is large format.

EXTREME scoring wheels and rollers are made of high quality tungsten carbide, with a special titanium carbide coating. Thanks to this coating, RUBI EXTREME rollers and scoring wheels suffer less wear during use. But in addition, the EXTREME scoring wheels and rollers when mounted on a bearing, completely eliminates the friction of the wheel itself with the wheel shaft. This combination allows the behavior of the EXTREME scoring wheel to be much superior to the rest, offering a soft scratch and a life of 300%, compared to SILVER scoring wheels and rollers under the same conditions of use.

The MULTIDRILL guide allows efficient centering both in the drilling of holes in dry cut and in wet cutting. The MULTIDRILL guide is fixed using a suction cup, directly on the surface to be drilled, either horizontally or vertically. Of great precision and reliability, the MULTIDRILL guide ensures an exact perforation and avoids possible displacements of the bit. The MULTIDRILL guide is compatible with DRYGRES, EASYGRES, FORAGRES, MINIGRES up to Ø83 mm. Includes connection for hose and tank (ref 50947).

The EASYGRES drill kits are the most economical solution for those users who need to make perforations of different diameters in all types of ceramic tiles. EASYGRES are diamond electrodeposited drills, wet cut, suitable for use with electric drill without hammer. The quality of the diamond used in the design and manufacture of the EASYGRES drill bits allows the drilling of stoneware, porcelain stoneware, granite, marble and glass.

The DRYGRES kits are the most economical solution for those users who need to drill, dry, of different diameters, in any type of ceramic tile. The range of DRYGRES diamond drills are recommended for the drilling of all types of ceramic tile, especially porcelain stoneware, and other coating materials such as marble and granite.

For drilling of all types of ceramic tiles, especially porcelain tiles, and other wall materials such as marble and granite, RUBI has the EASYGRES diamond drill bit range. The EASYGRES range are electroplated diamond drill bits for wet cutting, suitable for use with a non-percussive power drill.

he RUBI DC-250 range of tile saws is formed by machines with mobile heads offering the professional tile Installer maximum functionality and reliability. The DC-250 is ideal for intensive cutting of glazed and stoneware tiles, as well as for cutting porcelain tiles or the occasional cutting of natural stone. Available in two models: 850 and 1200, with cutting lengths of 38.6 and 47.4 in. respectively (including plunge cut).

1/8" x 1/8"

Stocked in 40 and 100 packs.

1/4" x 1/4" square notch trowel perfect for laying Ditra Heat matting.

11/64" x 11/64" Square notch trowel.

1 1/4" wood screws - packs of 200 or 600 screws. High-quality, corrosion-resistant fasteners designed for attaching backerboards to wood or steel framing, inside and out.