STOCK PRODUCTS

Installation Products

HYDRO BAN Sheet Membrane
HYDRO BAN® Sheet Membrane is a waterproof sheet membrane that is installed using a substrate appropriate LATICRETE® thin-set. Due to its polymeric construction, HYDRO BAN Sheet Membrane can also be used as a vapor barrier/waterproofing membrane for steam room and steam shower applications. Available in rolls, tapes, corners and collars, HYDRO BAN Sheet Membrane allows for a quick, easy waterproofing installation, which will retain its integrity for the life of the installation.
HYDRO BAN Preformed Niche
HYDRO BAN Preformed Niche is a component of the expanded HYDRO BAN line of waterproofing products that allow for high quality rapid shower installations. HYDRO BAN Preformed Niche is constructed of lightweight high-density expanded polystyrene with a waterproof finish and is ready to tile.
HYDRO BAN Preformed Curb Overlay
HYDRO BAN Preformed Curb Overlay is made from high-density expanded polystyrene with a liquid waterproof membrane coating. HYDRO BAN Preformed Curb Overlay is lightweight and ready-to-tile.
HYDRO BAN Board
3' x 5' x 1/2", 4' x 8' x 1/2". A lightweight easy to handle and ready to tile wall board designed to be used in bonded tile or stone installations.
9255 HYDRO BAN
HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that does not require the use of fabric in the field, coves or corners. HYDRO BAN is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. It bonds directly to a wide variety of substrates. Equipped with Microban antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane.
9235 Waterproofing Membrane
9235 Waterproofing Membrane is an easy to install, thin, load-bearing waterproofing membrane designed specifically for the special requirements of ceramic tile, stone and brick installations. It’s a perfect solution for wet areas and continuous water submersion applications.
Kerdi Shower Center Drain Trays
Pre-sloped shower trays integrated with Kerdi waterproofing fabric. Center drain pans are available in 36" x 36", 36" x 48", 38" x 38", 38" x 60", 48" x 48", 48" x 60", 48" x 72", 60" x 60", and 72" x 72".
Tileable Grate Linear
Stocked in sizes 24", 28", 32", 36", 40", 44", and 48" grates.
Kerdi Shower Curb
Available in 38", 48", and 60" long which are all 4 1/2" wide and 6" tall.
Kerdi Pipe Seal
Available in 3/4" and 1/2" prefabricated waterproofing seals with over-molded rubber gaskets designed for protrusions through KERDI, DITRA, or DITRA-XL membranes and protect moisture-sensitive backing panels at the mixing valve.
Perforated Grate in Brushed Stainless Steel
Stocked in sizes 24", 28", 32", 36", 40", 44", and 48" grates.
Kerdi Outside Corners
Available in 2 and 10 packs of preformed, seamless corners made for waterproofing inside and outside corners of KERDI, KERDI-BOARD, and DITRA assemblies to prevent leaks and mold-growth.
Kerdi Mixing Valve Seal
4 1/2" prefabricated waterproofing seals with over-molded rubber gaskets designed for protrusions through KERDI, DITRA, or DITRA-XL membranes and protect moisture-sensitive backing panels at the mixing valve.
Linear Drain Bonding Flange
Stocked in 24" to 48". Call for availability and pricing.
Kerdi Linear Drain Edge
Prefabricated expanded polystyrene sloped trays with integrated KERDI waterproofing specifically designed to accept the KERDI-LINE linear drain. The trays are stocked in 39" x 39", 48" x 48", 55" x 55", 36" x 72" (drain on 36" side), and 38" x 76" sizes. The 38" x 76" trays are available with drain insultation on either 38" or 76" side. The KERDI-SHOWER-LT/-LTS are available with center (-LT) and perimeter (-LTS) drain placements in ten configurations with reduced perimeter heights to aide in the installation of curbless showers.
Linear Drain Center
Prefabricated expanded polystyrene sloped trays with integrated KERDI waterproofing specifically designed to accept the KERDI-LINE linear drain. The trays are stocked in 39" x 39", and 55" x 55" sizes. The KERDI-SHOWER-LT/-LTS are available with center (-LT) and perimeter (-LTS) drain placements in ten configurations with reduced perimeter heights to aide in the installation of curbless showers.
Kerdi Trowel
1/8" x 1/8"
Kerdi Roll
Kerdi waterproofing fabric rolls are 3' 3" wide. They are available in 54 SF, 108 SF, and 323 SF rolls.
Kerdi Fix Sealant
Available in 10.5 oz tubes in bright white
Kerdi Board
Waterproofing board available in multiple sizes and thicknesses. Call for availability and pricing. 2' x 8' x 2", 4' x 5' x 1/2", 4' x 8' x 1/2". A multifunctional tile substrate and building panel, which can also be used in bonded waterproofing assemblies with tile.
Kerdi Shower Bench
Waterproofed and ready to tile shower benches stocked- 38" wide x 11 1/2" long x 20" high 48" wide, 16" long x 20" high
Kerdi Band
Waterproofing strips used to seal butt joints and floor to wall connections. Stocked in- 5" x 33' and 5" x 98' 5", 7 1/4" x 16.5', and 7 1/4" x 98' 5"
Inside Corners KERECK_FI2
Available in 2 and 10 packs of preformed, seamless corners made for waterproofing inside and outside corners of KERDI, KERDI-BOARD, and DITRA assemblies to prevent leaks and mold-growth.
Fastener Kit KB-ScrewsWashers
Stocked in 40 and 100 packs.
Drain Strainer KD-STR
Hair strainer for Kerdi Drains
Drain Flange PVC
KDA5 FLK ABS 5 1/4" Adapter Kit is sold with waterproofing four inside corners, two outside corners, one pipe seal, one mixing valve, and one 10.5 oz. Kerdi- Fix tube.
Corner Seat KBSB610TA
KERDI-SHOWER-SB is waterproof and ready for tile, leaving only sealing of joints and corners to complete waterproofing. The bench is available in triangular and rectangular configurations in the following sizes (width x depth x height). The triangular benches are 16" x 16” x 20” (41 x 41 x 51 cm) and 24” x 24” x 20” (61 x 61 x 51 cm).
Linear Closed Grate in Brushed Stainless Steel
Stocked in sizes 24", 28", 32", 36", 40", 44", 48" and 72" grates. Call for stock location.
38" x 60" Offset Drain Kit
Sloped, prefabricated shower trays are designed to integrate with the Schluter®-KERDI-DRAIN. Kits include shower tray, two 38" curbs, one 128 SF roll of Kerdi, one 33" Kerdi Band roll, and a flange. Flange includes four inside, 2 outside corners, one pipe 3/4" seal, and 4 1/4" mixing valve seal.
38 "x 60" Center Drain Kit
Sloped, prefabricated shower trays are designed to integrate with the Schluter®-KERDI-DRAIN. Kits include shower tray, two 38" curbs, one 128 SF roll of Kerdi, one 33" Kerdi Band roll, and a flange. Flange includes four inside, 2 outside corners, one pipe 3/4" seal, and 4 1/4" mixing valve seal. *Also available in 48" x 48", 48" x 72", and 72" x 72".
12" x 20" Shower Niche KB12SN305508A1
Prefabricated shower niche made of KERDI-BOARD that can be installed in both KERDI and KERDI-BOARD wall assemblies. The shower niche features a 1/2" -thick by 2" wide integrated bonding flange and is available in 12" x 6", 12" x 12", and 12" x 20", and 12" x 28" sizes.
12" x 12" Shower Niche KB12SN305305A
Prefabricated shower niche made of KERDI-BOARD that can be installed in both KERDI and KERDI-BOARD wall assemblies. The shower niche features a 1/2" -thick by 2" wide integrated bonding flange and is available in 12" x 6", 12" x 12", and 12" x 20", and 12" x 28" sizes.
Allset White SETA50W
Schluter ALL-SET® is a specialized, modified thin-set mortar for use as a bond coat within tile assemblies that is optimized for use with Schluter® membranes and boards. Schluter ALL-SET® is smooth and creamy, as well as easy to handle and spread. It is sag-resistant and ideal for setting tile on both horizontal and vertical surfaces. Schluter ALL-SET® is suitable for use with ceramic, porcelain, and stone tile, including large and heavy tile, in conjunction with Schluter®-Systems’ uncoupling and waterproofing membranes (e.g., DITRA, DITRA-HEAT, KERDI, etc.), the Schluter®-Shower System, and KERDI-BOARD. Schluter ALL-SET® can be used in both interior and exterior systems and systems and is available in both grey and white.
Allset Gray SETA50G
Schluter ALL-SET® is a specialized, modified thin-set mortar for use as a bond coat within tile assemblies that is optimized for use with Schluter® membranes and boards. Schluter ALL-SET® is smooth and creamy, as well as easy to handle and spread. It is sag-resistant and ideal for setting tile on both horizontal and vertical surfaces. Schluter ALL-SET® is suitable for use with ceramic, porcelain, and stone tile, including large and heavy tile, in conjunction with Schluter®-Systems’ uncoupling and waterproofing membranes (e.g., DITRA, DITRA-HEAT, KERDI, etc.), the Schluter®-Shower System, and KERDI-BOARD. Schluter ALL-SET® can be used in both interior and exterior systems and systems and is available in both grey and white.